Ride Our Colours

Goldentyre brand guide

Ride our colours

Logo application guide for teams and riders

Goldentyre is built for the start line. When a team or rider carries our mark, it should look the same on every bike, in every paddock. Placement, reading direction and size, for the bike and for the rider's kit.

Goldentyre rider in neon kit on sand, yellow GOLDENTYRE band

Part 01 · Bike

Rally

Fork guards, swingarm and rear fender on a rally machine.

Goldentyre mark placement – Rally
Goldentyre mark placement – Rally · View full size ↗
1Fork guards

25 × 3.2 cm

  • Yellow rectangle, GOLDENTYRE wordmark only.
  • Short side 3.2 cm, from the artwork ratio.
  • Always toward the handlebar.
  • Do not mirror the mark: only the reading direction changes.
  • Neon yellow ground. No other logos on the rectangle.
2SwingarmConfirmed

18 × 3.2 cm

  • Horizontal, parallel to the arm.
  • Clear of the pivot and the chain.
  • Same reading direction on both sides.
3Rear fenderProposed

16 × 3.2 cm

  • On the fender side, parallel to the edge.
  • Left and right do not mirror.
  • Length to be confirmed on the model.

Fork guards · reading direction

↑
Rider's leftReads bottom to top
↓
Rider's rightReads top to bottom
Toward the handlebarNever mirrored. Only the reading direction changes.

Yellow dots on the board mark the application point only. Marks are shown beside the bike, not on it.

Part 02 · Bike

Motocross / Enduro

Fork guards, swingarm and rear fender on a motocross / enduro machine.

Goldentyre mark placement – Motocross / Enduro
Goldentyre mark placement – Motocross / Enduro · View full size ↗
1Fork guards

25 × 3.2 cm

  • Yellow rectangle, GOLDENTYRE wordmark only.
  • Short side 3.2 cm, from the artwork ratio.
  • Always toward the handlebar.
  • Do not mirror the mark: only the reading direction changes.
  • Neon yellow ground. No other logos on the rectangle.
2SwingarmConfirmed

18 × 3.2 cm

  • Horizontal, parallel to the arm.
  • Clear of the pivot and the chain.
  • Same reading direction on both sides.
3Rear fenderProposed

16 × 3.2 cm

  • On the fender side, parallel to the edge.
  • Left and right do not mirror.
  • Length to be confirmed on the model.

Fork guards · reading direction

↑
Rider's leftReads bottom to top
↓
Rider's rightReads top to bottom
Toward the handlebarNever mirrored. Only the reading direction changes.

Yellow dots on the board mark the application point only. Marks are shown beside the bike, not on it.

Part 03 · Kit

Rider

Chest, wrists and lower back on the rider's kit.

Rider front
Rider front · View full size ↗
Rider rear
Rider rear · View full size ↗
AChest

100 × 100 mm

  • Logo: G lockup.
  • Lockup at full width (100 × 77 mm), centred in the area, not stretched.
BBoth wrists / forearms×2

80 × 80 mm

  • One on each side.
  • Logo: G lockup.
  • Lockup at full width (80 × 61 mm), centred in the area, not stretched.
CLower back

250 × 50 mm

  • Logo: GOLDENTYRE wordmark (yellow).
  • Horizontal, centred on the lower back.
  • Wordmark at full width, centred in the yellow rectangle, not stretched.

A, B, C are positions on the rider, not logo names. Two logos only: G lockup (G + GOLDENTYRE) and GOLDENTYRE wordmark (yellow), original files, never redrawn, stretched or recoloured. Do not mirror the mark. No other logos in the area. Logo samples on the sheets are drawn to scale.